You are here:Home >> Products >> Optical Transc... >> 100G QSFP28 Tra... >> SQ-100G-SR-BD

Products

Products

Contact us

Tel: +86-755-3396 7196
Fax: +86-755 3396 7196
E-mail: [email protected]
Add: 1803C, Block AB, Bldg#1, HengMing Bay Exchange Center,
HuiLongPu, LongGang District, Shenzhen, 518172, China

SQ-100G-SR-BD

SQ-100G-SR-BD

SQ-100G-SR-BD

This product can support 100Gb/s bit rates. It is a parallel Quad Small Form-factor Pluggable (QSFP28) Bi-Direction optical module. The module integrates four host electrical data into two optical lanes (by Dual Wavelength VCSEL Bi-Directional Optical Interface, 850nm and 900nm) to allow optical communication over a 2-fiber duplex LC optical multi-mode fiber. Reversely, on the receiver side, the module de-multiplexes 2 sets of optical input signal and converts them to 4 channels of electrical data.
An optical fiber ribbon cable with an LC connector can be plugged into the QSFP28 module receptacle. Proper alignment is ensured by the guide pins inside the receptacle. The cable usually cannot be twisted for proper channel to channel alignment. Electrical connection is achieved through an MSA-compliant 38-pin edge type connector. The module operates by a single +3.3V power supply. LVCMOS/LVTTL global control signals, such as Module Present, Reset, Interrupt and Low Power Mode, are available with the modules. A 2-wire serial interface is available to send and receive more complex control signals, and to receive digital diagnostic information. Individual channels can be addressed and unused channels can be shut down for maximum design flexibility.
The product is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP28 Multi-Source Agreement (MSA). It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The module offers very high functionality and feature integration, accessible via a two-wire serial interface.
  • l QSFP28 MSA compliant

    l Support 100GE aggregate bit rates

    l Support KP4 FEC @ 100G data rate

    l Two independent full-duplex channels

    l Up to 100m OM4 MMF transmission

    l Operating case temperature:

    l 0 to 70 C @ 100G

    l Single 3.3V power supply

    l Maximum power consumption 4W

    l LC optical connector

    l RoHS-6 compliant

  • Package (Form Factor) QSFP28 
    Data Rate   100Gb/s
    Transmitter VCSEL
    Receiver PIN
    Distance 100M
    Centre Wavelength 850nm
    Diagnostics Digital Monitor
    Operating Case Temperature 0°C ~ 70°C
    Voltage Supply (typical) 3.3v
    Connector Duplex LC
    TX Output Power -6.2~4dBm
    RX Sensitivity <-6.6dBm
  • l Data Center

    l Infiniband HDR

    l 100G Ethernet

  • Please submit your basic information and we will reply you as soon as possible! 

    *

    *

    *

    *

Related products