Products
Contact us
Fax: +86-755 3396 7196
E-mail: sales@skyoptics.cn
Add: 1803C, Block AB, Bldg#1, HengMing Bay Exchange Center,
HuiLongPu, LongGang District, Shenzhen, 518172, China
SQD-200G-SR4

SQD-200G-SR4
SQD-200G-SR4
This product is a parallel 200Gb/s Quad Small Form Factor Pluggable (QSFP56) optical module. It provides increased port density and total system cost savings. The design is compliant to IEEE802.3bs Annex120E (200GAUI-4 C2M). The QSFP56 full-duplex optical module offers 4 independent transmit and receive channels, each capable of 53.125Gb/s operation for an aggregate data rate of 200Gb/s on 70 meters of OM3 multi-mode fiber. An optical fiber cable with an MTP/MPO-12 APC connector can be plugged into the QSFP56 SR4 module receptacle. Proper alignment is ensured by the guide pins inside the receptacle. The cable usually cannot be twisted for proper channel to channel alignment. Electrical connection is achieved through a QSFP56 MSA-compliant edge type connector. The central wavelengths of all the 4 parallel lanes are 850nm. It contains an optical MPO-12 APC connector for the optical interface and a 38-pin connector for the electrical interface. Host FEC is required to support up to 70m OM3 multi-mode fiber transmission. The product is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP56 Multi-Source Agreement (MSA). It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference.-
· QSFP56 MSA compliant
· 4 parallel lanes on 850nm center wavelength
· Compliant to IEEE 802.3bs Specification
· Up to 100m transmission on multi-mode fiber (MMF) OM3 with FEC
· Operating case temperature: 0 to 70oC
· 4x53.125Gb/s electrical interface (200GAUI-4)
· Data Rate 53.125Gbps (PAM4) per channel.
· Maximum power consumption 5W
· MPO-12 APC connector
· RoHS compliant